Contents - Index

TS-480 Menu






Menu settings using the keyboard:

For those who would rather use the keyboard for data entry than the mouse, it is possible to do so in the menu:

Use the Up, down, left and right arrow keys to move around the menu.

When you want to change an alphabetic or numerical value, press the <ENTER> key.   Depending on the data, either a drop-down list will appear, or data may be entered as in a text editor.    For the drop-down list, use the up/down arrow keys to scroll through the values.  Enter data into the text editor as you normally would.   A <ENTER> will confirm the change.

For the selections with buttons,  use the space bar to step among the choices. 


The menu settings are listed below for reference.


Function No.  Menu    Possible settings
000  Display brightness   OFF,1, 2,3,4 
001  Key illumination    ON/OFF
002  Auto Mode operation   ON/OFF
003  Tuning control adjustment rate  1000,500,250(Hz)
004  Tuning with Tuning control in FM mode ON/OFF
005  Rounds off VFO frequencies changed  ON/OFF
  by using the MULTI control
006  9 kHz frequency step size for the  ON/OFF
  MULTI control in AM mode on the 
  AM broadcast band
007  Tunable(ON) or fixed (OFF)memory ON/OFF
  channel frequencies
008  Program scan partially slowed   ON/OFF
009  Slow down frequency range for the 500,400,300,200,100(Hz)
  Program scan
010  Program scan hold   ON/OFF 
011  Scan resume method    co/to
012  Beep output level   OFF,1,2,3,4,5,6,7,8,9
013   TX sidetone volume   OFF,1,2,3,4,5,6,7,8,9
014  VGS-1 message playback volume OFF,1,2,3,4,5,6,7,8,9
015  VGS-1 announcement volume  OFF,1,2,3,4,5,6,7,8,9
016  VGS-1announcement speed  OFF,1,2,3,4
017  Use CW IF filter for SSB reception ON/OFF
018  DSP RX equalizer   OFF,Hb1,Hb2,FP,bb1,bb2,c,U
019  DSP TX equalizer   OFF,Hb1,Hb2,FP,bb1,bb2,c,U
020  DSP TX filter bandwidth for SSB or AM 2.0,2.4
021  Fine transmission power tuning  ON/OFF
022  Time-out timer    OFF,3,5,10,20,30 (minutes)
023  Transverter frequency display  ON/OFF
024  Output power adjustment for Transverter ON/OFF
025  TX hold when AT completes the tuning ON/OFF
026  In-line AT while receiving   ON/OFF
027  Control method for the external AT At1,At2
028  Linear amplifier control delay for HF OFF,1,2,3 
  band 
029  Linear amplifier control delay for 50 MHz OFF,1,2,3
  band
030  Constant recording   ON/OFF
031  Repeat the playback   ON/OFF
032  Interval time for repeating the playback 0 to 60 ( in steps of 1s )
033  Keying priority over playback  ON/OFF
034  CW RX pitch/TX sidetone frequency 400 to 1000 Hz in steps of 50 Hz
035  CW keying dot/dash weight ratio  AUTO 2.5,2.6,2.7,2.8,2.9,3.0,3.1,3.2,3.3..4.0 ( in steps of 0.1 )
036  Reverse CW keying auto weight ratio ON/OFF
037  Bug key function   ON/OFF
038  Swap dot and dash paddle position ON/OFF
039  Auto CW TX in SSB mode  ON/OFF
040  Frequency correction when changing ON/OFF
  from SSB to CW
041  FSK shift    170,200,425,850 (Hz)
042  FSK keying polarity   ON/OFF
043  FSK tone frequency   1275,2125(Hz)
044  Mic gain for FM    1,2,3
045  Filter bandwidth for Data   ON/OFF
  communications
046  AF input level for Data communications 0,1,2,3,4,5,6,7,8,9
047  AF output level for Data communications 0,1,2,3,4,5,6,7,8,9
048  Remote Control panel PF key  00..99(2-digit) As follows:
       0..60 Menu No. 00..60
       61: VOICE1,   62: VOICE2,  63: RX Monitor, 
       64: DSP RX Monitor,  65: Lock Freq.,   66: Send(TX),
       67: TX tune,  68: LSB<>USB.  69: CW<>FSK, 
       70: FM<>AM,   71: TF-SET,   72: QMR, 
       73: QMI,   74: SPLIT,   75: A/B, 
       76: M/V,  77: A=B,   78: SCAN, 
       79: M>VFO,  80: M.IN,   81: CW.T, 
       82: CH1,   83: CH2,   84: CH3, 
       85: FINE,   86: CLR,   87: MTR, 
       88: MHz,   89: ANT 1/2,   90: NB, 
       91: NR,   92: BC,   93: DNL, 
       99: No function
  
049   Microphone PF 1 key   Same as 048
050  Microphone PF 2 key   Same as 048
051  Microphone PF 3 key   Same as 048
052  Microphone PF 4 key   Same as 048

053  Split frequency transfer in master/ ON/OFF
  slave operation
054  Permit to write the transferred Split ON/OFF
  frequencies to the target VFOs 
055  TX inhibit    ON/OFF
056  COM port communication speed  4800,9600,19200,38400,57600,115200 ( bps )
057  DTS polarity    0FF/ON
058  Busy lockout ( TX )   ON/OFF
059  APO ( Auto Power Off ) function  OFF,60,120,180 ( minutes )
060  Transmit with the audio input on the ON/OFF
  DATA terminal